Nightcrawler™Men's Glow-in-the-Dark Skeleton Motorcycle Gloves

$149.00
Size: XS

Fit advice: A · Length: hand flat, fingers together, from the tip of the middle finger to the crease at the wrist. B · Circumference: wrap the tape round the widest part of the palm, just...

The details

Overview
Motrox Australia · Gear Up For Safety
Nightcrawler™ Motorcycle Gloves
Glow-In-The-Dark Skeleton · Goat Leather Palm · Kevlar®-Laminated Back · Touchscreen
Glows After Dark
💀
Glow-In-The-Dark
✋
Leather Palm
📱
Touchscreen
🇦🇺
Free Shipping

The Motrox Nightcrawler™ is the glove that shows up after dark: a skeleton bone print that glows green on the back of each hand, a goat leather palm over 4 mm rubber palm protection, and Kevlar®-laminated foam behind the back of the hand.

Touchscreen thumb and index, silicone grip on the palm, stretch between the fingers and a rubber-tabbed wrist strap. Pair it with a Vanguard™ or Goshawk™ hoodie and you are set for the ride home.

Pick your size above. Sizes run XS–3XL; the chart is below and in the photos. Ships free Australia-wide.

At A Glance
Glows
Skeleton print, at night
Goat Leather
Palm
4 mm
Rubber palm protection
Kevlar®
Laminated back foam
Touchscreen
Thumb and index
XS–3XL
Seven sizes
Free Delivery
Australia-wide
15–19 days
Lead time, tracked
Tech Specs · What Is Built Into It
The bones glow green after dark
01 · Glow
Skeleton That Lights Up
The bone print on the back of the hand is cut out in glow-in-the-dark material and shines green after dark.
02 · Palm
Goat Aniline Leather
Soft, grippy goat leather across the palm, the part that holds the bar all day.
03 · Palm Protection
4 mm Dynamic Rubber
A 4 mm rubber layer with double-layer synthetic leather over the high-impact zone of the palm.
04 · Back Of Hand
Kevlar®-Laminated Foam
2.5 mm foam laminated with Kevlar® under a textured popcorn-weave shell.
05 · Grip
Silicone Palm Panels
Silicone detailing on the palm keeps a hold on the bars and controls.
06 · Closure
Rubber Wrist Strap
Hook-and-loop strap with a rubber tab, PU piping round the cuff.
What This Glove Is
1
Seen After Dark
The skeleton glows. Charge it in daylight or under the garage light and the bones shine green on the night ride home.
2
Built Into The Palm
Goat leather over 4 mm rubber. Protection sits where your hand meets the bar and where it lands first.
3
Phone Without Taking Them Off
Touchscreen thumb and index. Answer the map or the music at the lights, gloves on.
Key Features
Key Features
Construction · Goat Leather Palm · Kevlar®-Laminated Back
A goat aniline leather palm over 4 mm dynamic rubber, a textured back with Kevlar®-laminated 2.5 mm foam and a polyester lining, finished with a glow-in-the-dark skeleton print.
✓
Glow-In-The-Dark Skeleton Print
The bone cut-out on the back of each hand glows green at night. It looks the part and it makes your hands easier to see at the lights.
✓
Goat Aniline Leather Palm
Supple goat leather across the palm for feel on the bar and grip on the controls.
✓
4 mm Dynamic Rubber Palm Protection
A 4 mm rubber layer with double-layer synthetic leather in the high-impact zone of the palm.
✓
Kevlar®-Laminated Back-Of-Hand Foam
2.5 mm foam laminated with Kevlar® behind the textured popcorn-weave back, for impact cushioning and abrasion resistance.
✓
Silicone Grip Panels
Silicone detailing across the palm keeps a hold on the bars, wet or dry.
✓
Stretch Between The Fingers
Nylon-Lycra fourchettes so the fingers bend with you instead of against you.
✓
Touchscreen Thumb And Index
Touch fabric on the thumb and index finger works your phone without taking the gloves off.
✓
Rubber Wrist Strap
Hook-and-loop wrist strap with a rubber tab and PU piping at the cuff: quick on, quick off, sits snug under a jacket sleeve.
Closer Look
Skeleton Back
Bone cut-outs over a textured popcorn-weave back, the part that glows.
Leather Palm And Grip
Goat leather, silicone grip detailing and the reinforced impact zone.
Wrist Strap
Rubber-tabbed hook-and-loop strap with PU piping round the cuff.
The Details
Specification Detail
Palm Goat aniline leather; 4 mm dynamic rubber protection with double-layer synthetic leather in the high-impact zone
Grip Silicone palm panels
Back of hand Popcorn-weave textile with glow-in-the-dark skeleton cut-out; 2.5 mm Kevlar®-laminated foam
Fourchettes Nylon-Lycra stretch
Lining Polyester, laminated across the back of the hand
Touchscreen Thumb and index finger
Closure Rubber-tabbed hook-and-loop wrist strap, PU cuff piping
Colour Black with white skeleton print (glows green)
Sizes XS–3XL, see the chart below
Care Wipe clean with a damp cloth; leather conditioner on the palm now and then; air dry away from heat; do not machine wash or tumble dry
Delivery 15–19 business days, free Australia-wide
Size Chart — Hand Measurements
Nightcrawler™ Motorcycle Gloves
Hand measurements · centimetres
⚠️ How To Measure
A · Length: hand flat, fingers together, from the tip of the middle finger to the crease at the wrist. B · Circumference: wrap the tape round the widest part of the palm, just below the knuckles, thumb left out. Measure both hands and use the larger. If A and B point to different sizes, go by the bigger one; each size allows about 3 mm either way. Not sure? Send us both numbers before you order.
# Your hand (cm) XS S M L XL 2XL 3XL
A Hand length tip of middle finger to wrist crease 18 19 20 21 22 23 24
B Hand circumference round the palm below the knuckles, thumb out 18.5 19.5 20.5 21.5 22.5 23.5 24.5
✓ The glove size chart is also in the photos | Open the full size guide
Quick Answers
Quick Answers
Do the bones really glow?

Yes. The skeleton cut-out on the back of each hand is glow-in-the-dark material. Give it some daylight or bright light and it glows green once it gets dark.

What protection is in the glove?

The palm has 4 mm dynamic rubber protection with double-layer synthetic leather in the high-impact zone, under a goat leather palm. The back of the hand has 2.5 mm Kevlar®-laminated foam.

Can I use my phone with them on?

Yes. The thumb and index finger have touchscreen fabric.

How do I pick my size?

Measure hand length and hand circumference as shown in the chart and use the bigger of the two sizes. Send us the numbers if you are not sure.

Are they good for summer?

They are a lightweight textile-and-leather glove with stretch fourchettes and a short cuff, suited to warm-weather and everyday riding.

Are they EN 13594 rated?

They are not sold with an EN 13594 rating. NSW learner and P-plate riders need an EN 13594 glove, such as our Crosstown™.

How do I look after them?

Wipe clean with a damp cloth and let them air dry away from heat and direct sun. A little leather conditioner on the palm now and then keeps it supple. Do not machine wash or tumble dry.

How long until they arrive?

Approximately 15 to 19 business days. Delivery is free Australia-wide and tracking is emailed as soon as they ship.

Delivery, Returns & Care
🚚
Lead Time & Delivery: Approximately 15 to 19 business days. Delivery is free Australia-wide with nothing extra to pay, and tracking is emailed as soon as they ship.
↩️
Returns & Exchanges: Handled directly by Motrox Australia under our Refund Policy. Check the size chart before ordering; size exchanges take the same lead time.
🧴
Care: Wipe clean with a damp cloth and air dry away from heat and sunlight. Leather conditioner on the palm as needed. Do not machine wash or tumble dry.
Delivery & returns

See our Return & Exchange Policy and Shipping Policy for the full details.

Real riders

Reviews

Complete your kit

Ride with the full set

Men's Kevlar Motorcycle Jeans – Stockman Rated 4.6 out of 5 from 20 reviews
  • CE armour
  • Kevlar®
$139.00
Men's Kevlar Motorcycle Jeans – Stockman Indigo Rated 4.5 out of 5 from 2 reviews
  • CE armour
  • Kevlar®
$139.00
Hi-Vis Waterproof Motorcycle Jacket with CE Armour – Outback Rated 5.0 out of 5 from 3 reviews
  • CE armour
From$149.99
Men's Textile Touring Jacket – Nullarbor Rated 3.0 out of 5 from 1 review
  • CE armour
From$134.99