Motrox Gear Care Guide
Follow our easy care instructions to keep your gear in top condition for years of riding pleasure.
Motorcycle Jeans
1. Remove armor.
2. Turn inside out.
3. Close zippers and buttons.
4. Machine wash separately on a gentle cycle at 30°C.
5. Do not use fabric softener.
6. Hang dry at room temperature.
Kevlar Motorcycle Jeans
1. Remove protective elements.
2. Turn inside out.
3. Wash on a mild cycle with cold water at max 30°C.
4. Air dry or tumble dry on low temperature if necessary.
5. Wash less frequently for durability.
6. Use freezer method for odor removal.
Leather Racing Suit
1. Follow manufacturer instructions.
2. Test a small area first.
3. Use mild leather cleaner with lukewarm water and a microfiber cloth.
4. Gently clean with a soft-bristled brush.
5. Air dry away from direct sunlight or heat.
6. Condition after drying.
Leather Jacket & Pants
1. Wipe with a soft damp cloth and leather cleaner for tougher spots.
2. Air dry naturally in a shaded, ventilated area.
3. Condition every 3-6 months to maintain softness and prevent cracks.
4. Do not machine wash or dry clean.
Textile Gear
1. Remove inner liners and armor.
2. Close all zippers and hook-and-loop fixtures.
3. Use specially formulated TEXTILE WASH detergent at max 30°C on a gentle cycle.
4. Hang to drip dry at room temperature.
5. Avoid using fabric softeners.
Motorcycle Gloves
1. Clean by hand using a damp cloth.
2. For difficult stains, use neutral soap or special leather/textile cleaner.
3. Avoid hot water, solvents, or direct heat.
4. Ensure gloves are completely dry before storage.
Motorcycle Boots
For boots:
- Waxed pull-up leather: Use colorless leather grease/shoeshine matching the leather color.
- Full grain leather: Use colorless leather grease.
- Suede: Only brush to clean, do not use grease.
1. Let wet boots dry naturally at room temperature.
2. Remove dust and dirt with a soft brush.
3. Clean the sole separately.
4. Use leather cleaner for difficult stains.
5. Apply leather conditioner regularly.
MOTO-TEX Gear
1. Remove inner liners and armor.
2. Close zippers and hook-and-loop fixtures.
3. Machine wash on a warm permanent-press cycle (40º C) using liquid detergent.
4. Rinse twice, minimizing spinning to reduce creasing.
5. Never use powder detergents or fabric softeners.
6. Line dry or tumble dry gently, then reactivate the DWR treatment by tumble drying for 20 minutes.